How many nicotine shots to add to a 50ml or 100ml e-liquid? Simple table
You've bought a 50ml or 100ml nicotine-free e-liquid, but you're not sure how many nicotine shots to add? This is a very common question, especially when transitioning from small 10ml bottles to larger formats. The dosage might seem complicated at first, but with a simple chart, everything becomes much clearer. 💧
In this article, we'll look at how many shots to put in a 50ml or 100ml e-liquid to get approximately 3mg, 6mg, or more. The goal is to help you prepare your mix safely, while maintaining an enjoyable vape adapted to your equipment.
What is a nicotine shot?
A nicotine shot is a small bottle, often 10ml, containing concentrated nicotine. It is used to add nicotine to a large format sold without nicotine, such as a 50ml or 100ml e-liquid.
On TornaPuff, you can find 20mg nicotine shots to adapt your e-liquid to your desired dosage.
Important: nicotine is addictive and nicotine products are for adults only. You shouldn't aim for the highest possible strength, but rather choose a dosage that suits your habits. ⚠️
Why are 50ml and 100ml e-liquids often nicotine-free?
Large formats like 50ml and 100ml are generally sold without nicotine. The idea is simple: you choose your flavor, then you add one or more nicotine shots depending on the desired strength.
That's why 50ml nicotine-free e-liquids and 100ml nicotine-free e-liquids are practical: they allow you to have more liquid for longer, with a customizable dosage.
The simple rule to remember ✅
In most cases, a standard nicotine shot is 10ml and contains 20mg/ml of nicotine. When you add it to a nicotine-free e-liquid, the final strength depends on the total volume obtained after mixing.
Simple example: if you add 1 x 10ml shot to 50ml of nicotine-free e-liquid, you get about 60ml of final liquid. The final strength will be around 3mg/ml.
The more shots you add, the higher the nicotine strength, but the larger the final volume also becomes. That's why you should always check if your bottle has enough space.
Nicotine shot dosage chart for 50ml e-liquid
Here's a simple chart to understand how many shots to add to a 50ml nicotine-free base. The dosages are approximate values, but very useful for quick reference.
| E-liquid Base | Number of 20mg shots | Final Volume | Approximate Strength |
|---|---|---|---|
| 50ml nicotine-free | 1 shot | 60ml | approx. 3mg/ml |
| 50ml nicotine-free | 2 shots | 70ml | approx. 6mg/ml |
| 50ml nicotine-free | 3 shots | 80ml | approx. 7.5mg/ml |
| 50ml nicotine-free | 4 shots | 90ml | approx. 9mg/ml |
In practice, the most common dosage with a 50ml is often 1 shot to get about 3mg/ml. If you want a higher dosage, you need to add more shots, but the taste might become slightly less intense because the liquid is more diluted.
Nicotine shot dosage chart for 100ml e-liquid
With a 100ml e-liquid, you need more shots to reach the same nicotine strength. This is logical: the more nicotine-free liquid there is initially, the more diluted the nicotine will be.
| E-liquid Base | Number of 20mg shots | Final Volume | Approximate Strength |
|---|---|---|---|
| 100ml nicotine-free | 1 shot | 110ml | approx. 2mg/ml |
| 100ml nicotine-free | 2 shots | 120ml | approx. 3mg/ml |
| 100ml nicotine-free | 3 shots | 130ml | approx. 4.5mg/ml |
| 100ml nicotine-free | 4 shots | 140ml | approx. 6mg/ml |
| 100ml nicotine-free | 5 shots | 150ml | approx. 6.5mg/ml |
For a 100ml e-liquid, the most common dosage is often 2 shots to get about 3mg/ml. To get closer to 6mg/ml, you'll need 4 shots, provided you have enough space in the bottle or use a larger empty bottle. You can use our free DIY calculator by clicking HERE.
How many shots to get 3mg?
If you're looking for a mild dosage, around 3mg/ml, it's quite simple:
- For 50ml: add 1 x 10ml, 20mg shot.
- For 100ml: add 2 x 10ml, 20mg shots.
3mg is often chosen by vapers who want a light nicotine hit, especially with fruity, fresh, or gourmet e-liquids. It's also a common strength for larger formats.
How many shots to get 6mg?
To get approximately 6mg/ml, you need to add more shots:
- For 50ml: add 2 x 10ml, 20mg shots.
- For 100ml: add approximately 4 x 10ml, 20mg shots.
Be careful: at this dosage, the final volume increases significantly. You need to check if the bottle can hold the complete mix. If not, use a suitable empty bottle.
Can you add too many shots? ⚠️
Yes, and it's not a good idea. Adding too many shots can make the liquid too strong, less enjoyable, and harder to vape. It can also dilute the flavors, as you're adding a lot of nicotinized base compared to the original liquid.
If you need a high nicotine strength, it might be simpler to directly choose pre-nicotinized 10ml e-liquids, rather than over-boosting a large format.
Large formats are mainly interesting for low or medium dosages, like 3mg or 6mg. For higher dosages, ready-to-use small formats might be more practical.
How to properly mix your e-liquid with a nicotine shot?
Once the shot(s) are added, you shouldn't vape immediately without mixing. The liquid and nicotine must be well distributed throughout the bottle.
Here's the simple method:
- Open the nicotine-free e-liquid bottle.
- Add the necessary shot(s).
- Close the bottle tightly.
- Shake vigorously for 30 seconds to 1 minute.
- Let it steep for a few minutes before use.
For some gourmet liquids, a longer steeping time can help the flavors mix better. For fresh fruity ones, a few minutes are often enough.
Does the taste change after adding shots?
Yes, slightly. The more shots you add, the more you dilute the original flavor. With 1 shot in 50ml, the difference is usually slight. With 3 or 4 shots, the taste can become less intense.
That's why it's better to choose a heavily flavored e-liquid if you plan to add several shots. Fruity, fresh, or puff-type flavors often retain good intensity even after adding one or two shots.
You can find puff e-liquids if you're looking for intense, puff-like flavors in a refillable format.
What dosage to choose based on your profile? 🤔
The right dosage depends on your habits, your equipment, and your personal feeling. You shouldn't just look at the numbers: the same dose can feel mild on one device and much stronger on another.
- 0mg: for vaping without nicotine.
- 3mg: light dosage, often suitable for large formats.
- 6mg: medium dosage, more noticeable throat hit.
- Above 6mg: to be used with caution, especially depending on the equipment.
If you're using a compact pod or a simple electronic cigarette, avoid overdosing. Too much nicotine can make vaping less pleasant.
Boosting a 50ml e-liquid: the simplest case
50ml is the easiest format to boost. Generally, a 50ml bottle is often designed to receive one shot and yield approximately 60ml at 3mg.
This is a good solution if you want a large format without too much hassle. You choose your flavor, add a shot, shake it, and your mix is ready. ✅
Boosting a 100ml e-liquid: pay attention to volume
100ml is very economical, but it requires a bit more attention. If you want to add 2, 3, or 4 shots, the bottle needs to be able to contain the final volume.
For example, 100ml + 2 shots = approximately 120ml of final liquid. If your bottle can only hold 100ml or 110ml, you'll need to use a larger empty bottle to mix properly.
This is an important detail, as an overfilled bottle is difficult to shake and can leak.
To boost or to buy pre-nicotinized 10ml directly?
Both solutions have their advantages. Large formats with shots are practical for saving money, especially at 3mg or 6mg. Pre-nicotinized 10ml bottles are simpler if you want a ready-to-use dosage.
If you like to try several flavors, 10ml bottles are more practical. If you've already found your favorite flavor, 50ml and 100ml become more economical.
Conclusion: the simple chart to remember
To summarize, the simplest dosages are:
- 50ml + 1 shot = approx. 3mg/ml.
- 50ml + 2 shots = approx. 6mg/ml.
- 100ml + 2 shots = approx. 3mg/ml.
- 100ml + 4 shots = approx. 6mg/ml.
The most important thing is to choose an appropriate dosage, mix your liquid well, and check that your bottle has enough space. With the right shots and the right format, you can enjoy a more economical, personalized e-liquid better suited to your vaping style. 💨
